HANDIFOAM HIGH DENSITY

Low - Pressure Spray Polyurethane Foam (SPF). HandiFoam High Density is crafted for projects needing high - compressive strength foam. It's perfect for roofing repairs, night seals, and areas with foot traffic. Its smooth surface finish cuts down the need for extra coatings or secondary smoothing before application. This product uses an HFO blowing agent, showing our commitment to low - impact foam chemistries and better performance. Key features include an initial R - value of 6.5 at 1 - inch thickness, a free - rise density of 3.10 lbs./ft3 (50 kg/m3), a tack - free time of 30 - 60 seconds, and a fully - cured time of 1 hour. It has 95% closed - cell content and an ASTM E84 Class 1 (A) fire rating at 2' thick. With a 12 - month shelf life, it comes with a warning about cancer and reproductive harm (www.p65Warnings.ca.gov). There are various related links and downloads, and it can be used in commercial, industrial, and residential insulation, as well as for other creative and repair purposes.

Using HandiFoam High Density is easy. First, make sure the surface is clean and dry. You can use it for roofing repairs, night seals, or filling voids. Just spray it on the area where you need high - compressive strength foam. After spraying, it'll be tack - free in 30 - 60 seconds and can be cut in 2 - 5 minutes. It'll be fully cured in 1 hour. Remember, this product contains substances that can cause cancer and reproductive harm, so always follow the safety warnings at www.p65Warnings.ca.gov. Store it in a cool, dry place and use it within 12 months. If you have any questions about its use in cold weather, check the HandiFoam Cold Weather Bulletin. For detailed operating instructions, refer to the Operating Instructions – HandiFoam Disposable.