The NCP Quart - Sized Acid Stain is a great choice for your concrete projects. First, clean the concrete. Use EZ Super Clean to get rid of dirt and stains, and Cleaner & Degreaser to remove oily deposits. Make sure the surface has no sealants or coatings. Then, you can apply the stain using an acid brush, sponge, or plastic spray in your favorite color and technique. Let it dry well. Drying time depends on the surface and humidity. After that, wash or wipe off the residue from the surface. Let it dry completely again, usually at least 24 hours, and then apply a sealer to enhance and protect your finished work. For indoor projects, EZ WB Epoxy or EZ WB Acrylic are highly recommended. For outdoor projects, EZ Acrylic Sealer will keep your floor looking new. It covers 250 - 400 Sq. Ft. per gallon, depending on how you apply it and the surface condition. You can dilute it up to 1:1 with water, but note that dilution will make the color lighter.
Using the NCP Quart - Sized Acid Stain is easy. Start by cleaning the concrete surface. Use EZ Super Clean to take out dirt and stains and Cleaner & Degreaser for oily bits. Check that there are no sealants or coatings on the surface. Next, apply the stain. You can use an acid brush, sponge, or plastic spray. Choose the color and the way you want to apply it. Let it dry. The drying time changes based on the surface and how humid it is. Once it's dry, wash or wipe off the extra stain. Then, let it dry completely again, which usually takes at least 24 hours. After that, apply a sealer. For indoor work, go for EZ WB Epoxy or EZ WB Acrylic. For outdoor projects, use EZ Acrylic Sealer. It covers 250 - 400 Sq. Ft. per gallon. You can add water to it up to a 1:1 ratio, but be aware that this will make the color lighter. Always follow these steps to get the best results and keep your concrete looking great.
