Tenax Booster is a top - notch multipurpose tile and hard - surface cleaner. It can function both as a powerful stain remover when used at full strength and as an effective cleaner when diluted. This versatile product can tackle a wide range of discolorations on hard surfaces, such as stubborn organic dirt, rubber marks, waxes, and epoxy residue. For general - purpose cleaning, when diluted correctly, it can clean various surfaces including ceramic, porcelain, unpolished stone, glazed ceramic, cement, PVC, granite, unpolished marble, and non - glossy cement agglomeration. To use it as a general cleaner, mix 1 part Booster with 20 parts water, apply the mixture to the surface, let it sit for 5 - 10 minutes, scrub with a brush while wearing hand protection, and then rinse thoroughly. For stubborn stains, different strength mixtures can be used, like 1:10 for tougher dirt and 1:5 for the most stubborn ones. When using it to remove stains from porcelain stoneware, apply undiluted Booster with a small or paint brush, let it sit for about 10 minutes, scrub with a brush, and rinse well. For extremely stubborn stains, cover with plastic for several hours. Always read the safety data sheet and package instructions before use. Keep it out of children's reach, avoid eye and skin contact, don't mix it with other substances, and don't use it on waxed or glossy surfaces. The product has a shelf life of at least 12 months under normal conditions, away from heat, humidity, and sunlight. Remember to close the package after use.
Hey there! Here's how to use Tenax Booster. For general cleaning of surfaces like ceramic, porcelain, and more, mix 1 part Booster with 20 parts water. Pour the mixture on the surface you want to clean and let it sit for 5 - 10 minutes. Then, use a brush to scrub the area, but make sure to wear hand protection. After that, rinse the surface really well to get rid of all the Booster. If you're dealing with stubborn dirt, you can use a stronger mixture. A 1:10 ratio is good for tougher dirt, and a 1:5 ratio is for the most stubborn ones. But before using a stronger mix, test it in a hidden spot. To remove stains from porcelain stoneware, use an undiluted Booster. Apply it with a small or paint brush and let it sit for about 10 minutes. Then, scrub the area with a brush and rinse with water. For super - stubborn stains, cover the stain with plastic and leave it for a few hours. Now, for safety. Keep this product away from kids. Don't let it touch your eyes or skin. And never mix it with other substances. Also, don't use it on waxed or glossy surfaces. When you're done using it, close the package. Store it in a normal place, away from heat, humidity, and sunlight, and it'll last at least 12 months.
