Description
This cold - water electric pressure washer with a roll cage design is built tough for long - lasting use and packs a powerful punch. These industrial - strength machines can deliver up to 5.0 GPM at 5,000 PSI. The belt - drive, electric roll cage models offer a cleaning power of 5,000 PSI and come in 230/3 phase or 460/3 phase options. They are specialty machines ideal for the marine market to clean boat bottoms or in the concrete industry for cleaning trucks, forms, and handling equipment. The 50' hose, professional - grade wand, guns, and fittings are rated for high pressure, and the washer is ETL safety certified. There are two models available: the HD 5.0/50 Eb Cage with part number 1.107 - 084.0, running on 230V / 3ph, and the HD 5.0/50 Ec Cage with part number 1.107 - 087.0, running on 460V / 3ph, both with a 5.0 GPM flow rate, 5000 PSI pressure, 20 HP power, and Kärcher KX pumps. Technical data includes a power supply of 3 / 230 / 60, an operating pressure of 5000 PSI, a flow rate of 5 GPM, 20 HP power, a connected load of 48 A, a ship weight (with accessories) of 480 lbs., and dimensions of 42 x 26 x 30 inches.
Using this pressure washer is easy. First, make sure to connect it to the correct power supply according to the model you have (either 230V / 3ph or 460V / 3ph). Then, attach the 50' hose, professional - grade wand, gun, and fittings. Turn on the power and start using it to clean. For the marine market, you can use it to clean the bottom of boats. In the concrete industry, it's great for cleaning trucks, forms, and handling equipment. When using, always wear appropriate safety gear. Don't use it in wet or damp conditions to avoid electrical hazards. After each use, turn off the power and disconnect all the accessories. Store it in a dry and cool place. Regularly check the hose, wand, and fittings for any signs of wear or damage. If you notice any issues, replace the parts as soon as possible to keep the pressure washer working well.
