HD3 HEPA Dust Collector

The HD3 is a top - notch three - motor HEPA dust extractor. It features a two - stage filtering system, including a conical main filter and three individually - tested H13 - certified HEPA filters. With three individual motor switches, it offers variable suction strength and power. The 'Reverse - air' jet - pulse filter cleaning system effectively removes dust build - up on the filters. An easy - to - use 'Inlet closure door' eliminates the need to remove hoses during filter cleaning. It can be easily connected to hand - operated power tools to extract concrete dust during cutting and grinding. Also, it comes with a 'Continuous Bag' disposal system for efficient dust collection. Technical specs include 230v, 50mm inlet, 4.8 HP power, 12 amps, 356 cfm air flow, 90 inches water lift, a pre - filter (f8) with 48 ft >99.5% @1.0um, a HEPA Filter (H13) with 39 ft2 >99.99% @0.3um, dimensions of 30' x 22' x 56', and a weight of 149lbs.

Using the HD3 HEPA Dust Collector is easy. First, connect it to your hand - operated power tools. You can adjust the suction strength and power by using the three individual motor switches according to your needs. When you're done using it, activate the 'Reverse - air' jet - pulse filter cleaning system to get rid of the dust on the filters. You don't need to remove the hoses as there's an 'Inlet closure door'. As for maintenance, check the filters regularly. Replace the pre - filter and HEPA filters when they're dirty or damaged. Keep the dust collector in a dry and clean place. Also, be careful when handling the power cord to avoid any electrical hazards.