The FL1 Lifter Series presents the Flat Lifter 300, a single - pad vacuum lifter ideal for lifting heavy objects, glass, and stone. It comes in multiple power options. The battery - powered FL1HV11DC offers cord - free operation, while the FL1HV11AIR uses compressed air, so you never waste time charging batteries. The corded FL1HV11ACS, powered by an AC outlet, also eliminates battery - charging time. With a single vacuum pad, it allows for quick attachment and release, enabling one person to handle heavy loads ergonomically. Standard features include a vacuum gauge, a vacuum line filter, and a vacuum reserve tank. The maximum load capacity is 300 lbs [135 kg], and it has a standard pad spread of 11' x 11' [279 x 279 mm]. WARNING: Cancer and/or Reproductive Harm - www.p65Warnings.ca.gov.
Using the Flat Lifter 300 is easy. First, choose the power option that suits your needs - battery, compressed air, or AC power. Connect the lifter to the power source as required. Then, place the single vacuum pad on the object you want to lift. The pad will quickly attach in about 2 seconds. Once attached, you can lift the object safely. When you're done, the release process takes about 3 seconds. Make sure the object's temperature is between 32°F [0°C] and 100°F [38°C], and the ambient temperature is within the same range. For maintenance, regularly check the vacuum gauge to ensure proper operation. Clean the vacuum line filter periodically to prevent blockages. Keep the vacuum reserve tank in good condition. Also, be aware of the load capacity - don't try to lift objects heavier than 300 lbs [135 kg]. And always remember the warning about cancer and reproductive harm.
