BNCE-20 #6 (20mm) Cutting Edge Saw

'This is an outstanding tool and a real innovation! Many of my customers have been thrilled with its development.' - Cliff S., Territory Manager at GluDown, Inc.

• The BNCE - 20 is a handy and lightweight tool. With a 3 - position removable side handle and a rotating trigger handle, it offers multiple cutting positions and great maneuverability in tight spaces.
• It can cut a wide range of materials, such as rebar, all - thread rod, coil rod, EMT conduit, pipes, and tubing.
• This saw emits very few cutting sparks, and the cut material has no burrs and is cool to touch.

• Specifications

VOLTAGE	120
HERTZ	60
AMPS	9
WATTS	1100
BLADE SIZE	4.375' (110 mm)
BLADE TYPE	(2 ea.) Tungsten Carbide Tipped
BLADE NUMBER OF TEETH	24
BLADE KERF	1.6 mm
NO LOAD RPM	2,000
DEPTH OF CUT	.860' (21.8 mm)
CONSTRUCTION TYPE	DOUBLE INSULATED
CORD TYPE	18 AWG, 2 CORD
PLUG TYPE	U.S. POLARIZED 2 - PRONG
CORD LENGTH	10 ft. (3 m)
TOOL LENGTH	20.3' (515 mm)
TOOL WIDTH	5.5' (140 mm)
TOOL HEIGHT	3.9' (99 mm)
NET TOOL WEIGHT	7.6 lbs. (3.5 kg)
ETL/UL Listed	Certified and Listed
WARRANTY	One year from date of purchase

Using the BNCE - 20 High - Performance Cutting Edge Saw is easy. First, make sure the saw is properly plugged in to a 120 - volt outlet. Adjust the side handle and trigger handle to your preferred position for better control. Then, choose the material you want to cut, like rebar or pipes. Hold the saw firmly and start the cutting process. Remember, this saw can cut a variety of materials, but always check if the material is suitable before cutting. As for safety, always wear safety goggles and gloves. Don't use the saw in wet conditions. For maintenance, after each use, clean the saw blade with a soft brush to remove any debris. Keep the saw in a dry place. If there are any problems, refer to the warranty information for assistance.