The BNCE - 30 - 24V is a cordless and lightweight compact saw. It can cut up to #8 rebar. It features a 3 - position removable side handle, giving you multiple cutting positions and better maneuverability in tight spaces. This saw can cut various materials like #8 rebar (1”), all - thread rod (up to 1 - 1/8”), coil rod, EMT conduit, pipe, and tubing. Its unique flush - cutting blade guard helps cleanly cut materials flush with a surface. Each saw comes with a one - year warranty from the purchase date. Specifications: It's a battery - powered tool with a 5' (127 mm) proprietary - mounting blade (Tungsten Carbide Tipped, 2 supplied), 30 teeth, 2,200 no - load RPM, 1.181' (30mm) depth of cut. The tool with battery is 17 1/2' (444.5 mm) long, 5 1/4' (133 mm) wide, 3 1/4' (82.6 mm) high, and weighs 7.2 lbs. (3.5 kg). It uses a 24V Lithium - Ion Battery (2 supplied), 6.0 Ah, 144 Wh, and comes with a standard 120V quick charger weighing 1 lbs (.5 kg).
Using the BNCE - 30 - 24V Cutting Edge Saw is easy. First, make sure the battery is fully charged and properly installed. The 3 - position removable side handle allows you to adjust it according to your cutting needs. When cutting, hold the saw firmly and guide it along the material you want to cut. You can use it to cut a variety of materials like rebar, all - thread rod, and more. Just keep in mind that the blade is sharp, so always wear safety gloves and goggles. For maintenance, after each use, clean the saw to remove any debris. Check the blade regularly for wear and tear. If the blade is dull, replace it with a new one. Also, store the saw in a dry place to prevent damage. The battery should be charged as needed, but don't overcharge it. With proper use and maintenance, your saw will serve you well for a long time, and remember it has a one - year warranty from the purchase date.
