The Zapp 600 Electric Wet Saw is a top - notch choice for cutting ceramic tiles, porcelain tiles, marble, granite, and natural stones. This sturdy machine features a reinforced motor and an aluminum structure for long - lasting durability. It comes with a cooling system for the diamond cutting blade, ensuring efficient operation. The retractable stand with wheels makes it easy to move around. The sliding table allows angular adjustment from 0° to 45° left and right, and the head can be adjusted at 0°, 22.5°, and 45°. It includes a 1 ø 10″ diamond cutting blade. The cut finish might vary according to the material. Model: 600. Straight cut: 24″ (610 mm). Diagonal Cutting: 17″ x 17″ (430 mm). Cutting thickness: 0º = 3.5″ (90 mm), 22.5º = 2.375″ (40 mm), 45º = 1.5″ (60 mm). Voltage: 110 V. Power: 2.2 HP. ø Bore: 10″ (254 mm), Bore 5.8″ (15.88 mm). Quantity per package: 1.
Using the Zapp 600 Electric Wet Saw is easy. First, make sure it's connected to a 110 - volt power source. Place the material you want to cut on the sliding table. Adjust the table and the head to the desired angles for the cut. When you start the saw, the cooling system will keep the diamond blade in good condition. Remember, the finish of the cut can be different depending on what you're cutting. Always wear safety goggles and gloves. Don't overload the saw or force the material through too quickly. For maintenance, keep the saw clean after each use. Check the motor and the blade regularly. If the blade gets dull, replace it with a new 1 ø 10″ diamond cutting blade. Store the saw in a dry place when not in use.
