The FCS Series RIP-R-STRIPPERS have brought a revolutionary change to the industry with their creative design and outstanding operational features.
Swiftly remove VCT tiles, rubber-backed carpeting, and sheet-type coverings from wood and concrete surfaces. Use the Back-Saver™ Blade Control System to adjust the blade attack angle on the go, maximizing your productivity. The blade clamping system stops unwanted flooring material build - ups under the clamp, reducing long - term maintenance costs. The convenient 16.0 lb static weights are integral, eliminating maintenance needs and the risk of lost parts. The fully adjustable operator handle folds easily for compact transport. It has a direct - drive, random orbit action and a welded, unitized frame. The package includes one 4 x 6 inch straight blade (part number FCS16 - 1100) and one 3 x 10 inch straight blade (part number FCS16 - 1300).
Specifications:
Operating Environment: Non - hazardous locations
Electric Motor: .75 HP (.56 Kw), 115 VAC, 60 HZ, 15.0 amperes
Nominal Oscillations: 1725/minute
Frame: Unitized, welded steel plate
Bearings: Ball - type
Drive System: Direct
Extension Cord: 12 - 3, SJTW x 37.0 ft. (11.3 M) length w/GFCI
GENERAL
Width, base unit @ caster wheels: 14.1 inches (358.1 mm)
Width, operator handle: 23.1 inch (586.7 mm)
Height, operator handle extended: 37.0 inches (939.8 mm)
Length, operator handle extended, less blade: 39.5 inches (1003.3 mm)
Length, operator handle folded/retracted, less blade: 24.4 inches (619.8 mm)
Weight: 137.2 lbs (62.2 kg), less blade and extension cord
Using the FCS16GEN3 RIP - R - STRIPPER® floor stripping machine is easy. First, make sure you're in a non - hazardous location. Plug in the 37 - foot extension cord with GFCI to a 115 VAC, 60 HZ power source. You can start removing VCT tiles, rubber - backed carpeting, or sheet - type coverings from wood or concrete surfaces right away. If you need to adjust the blade attack angle, use the Back - Saver™ Blade Control System without stopping the work. This will help you work more productively. The machine has a blade clamping system that prevents flooring material build - ups under the clamp, so you don't have to worry about extra maintenance. The 16.0 lb static weights are built - in, so you don't have to deal with part loss. When you're done, fold the fully adjustable operator handle for easy transport. For maintenance, keep the machine clean after each use. Check the electric motor regularly to make sure it's working properly. Also, check the ball - type bearings and the direct drive system for any signs of wear. Replace the blades when they get too dull, and you'll have a reliable floor stripping machine for a long time.
