Get a Dazzling Shine with MB-22® E-Z Polishing Powder
MB-22® E-Z Polishing Powder is a top - notch product crafted for marble and terrazzo, especially for calcite - based stones. Unlike other options, it won't damage surfaces from splatter, giving you a safe and effective way to achieve a brilliant shine.
Why Opt for MB-22 E-Z Polishing Kit
- Product Support – Get educated before you buy!
- Trusted by Pros – Our formula is better than watered - down competitors.
- Satisfaction Guaranteed – We use quality ingredients and test our products rigorously.
- Natural Stone Safe – Works great on marble, granite, travertine, slate, quartz, limestone and more.
What's in the Kit
✔ (1) 8 oz MB-22® E-Z Polish
✔ (1) 5 - inch Drill Attachment with Pad Driver
✔ (2) 5 - inch Hogs Hair Pads
✔ (1) 5 - inch White Pad
✔ (1) Easy Oxy Quart with Sprayer
✔ (1) Set of Instructions
How to Use
- Prepare: Cover and protect nearby surfaces. Wear safety glasses and gloves. Make sure the surface is clean of coatings, waxes, sealers, grease, and debris.
- Apply: Use a right - angle grinder/polisher (variable speed) with the included 5 - inch drill attachment and hogs' hair pad. Apply about 1/3 oz per 2 to 3 square feet and add enough water for a thick, non - splattering paste. Keep the paste wet while polishing by adding water as needed.
- Polish: Put the product in the middle of the area and add water. Place the machine and hogs' hair pad on top. Start slow and spread the product evenly. Apply light, even pressure and run the machine slowly for about one minute per square foot.
Pro Tip: When polishing near edges, sinks, and tight spaces, use the white pad cut ½ inch larger than the pad driver to protect other fixtures.
Need Help? Different stones may need small changes in product amount and technique. Call +1 (800) 342 - 3876 for expert advice.
Using the MB-22® E-Z Polishing Powder is easy. First, prepare the area. Mask off and protect the surrounding surfaces, and put on safety glasses and gloves. Make sure the surface you're working on is clean, without any coatings, waxes, sealers, grease, or debris. For application, use a right - angle grinder/polisher with variable speed, along with the included 5 - inch drill attachment and hogs' hair pad. Apply about 1/3 oz of the powder per 2 to 3 square feet, and add water to make a thick paste that won't splatter. Keep adding water as you polish to maintain the paste's wet consistency. When it's time to polish, put the product in the center of the area, add water, and place the machine and pad on top. Start slowly, spread the product evenly, and apply light, even pressure. Run the machine on a slow setting for about one minute per square foot. If you're polishing near edges, sinks, or tight spaces, use the white pad cut ½ inch larger than the pad driver to protect other fixtures. Remember, different stones might need a bit of adjustment in the amount of product used and the technique. If you're not sure, just call +1 (800) 342 - 3876 for some expert help.
