ANE-MVB-FC-3 is a top - notch, 100% solid, two - component fast - cure epoxy coating. It acts as an outstanding moisture vapor retarder for concrete, and it's suitable for various floor coverings like vinyl tiles, sheeting, and hardwood. This coating can be used as a primer for both flake and metallic coats. It cures quickly at normal and low temperatures, and it has excellent mechanical properties. ANE - MVB - FC - 3 effectively controls moisture vapor emission rates up to 25 lbs./24hr/1000 sq ft, while offering good chemical resistance. You can color it or mix it with different solid, liquid, or metallic liquid pigments. If moisture is detected, you can apply vinyl flakes over the tinted coat. For flake floors, a 3 - gallon kit covers 400 - 450 sq ft. As a primer base for metallic floors, it covers 350 - 400 sq ft per 3 - gallon kit. Part # ANE - MVB - FC - 3: 100% SOLID, TWO COMPONENT FAST CURE MOISTURE VAPOR BARRIER EPOXY COATING (25LBS / 24HR / 1,000 SQ FT).
Using the ANE - MVB - FC - 3 moisture vapor barrier is easy. First, make sure the concrete surface is clean and dry. Mix the two components of the coating well according to the instructions. You can use it as a primer for flake or metallic coats, or as a moisture retarder for different floor coverings. When applying, use a proper brush or roller. You can add pigments to color the coating as you like. If you detect moisture after applying the tinted coat, you can add vinyl flakes. For coverage, remember that a 3 - gallon kit covers 400 - 450 sq ft for flake floors and 350 - 400 sq ft as a primer for metallic floors. Keep the product in a cool and dry place. If any spill occurs, clean it up immediately. This coating doesn't require too much maintenance, but avoid harsh chemicals on the coated surface to keep its good condition.
