The B2000 is a top - notch industrial HEPA filter air scrubber, built tough for air cleaning tasks at construction sites. It's been tested and certified as both an air cleaner and a negative air machine. With a maximum airflow of 2000m3/h and two - speed settings (600cfm and 1200cfm), it can handle various air - cleaning needs. Before air reaches the HEPA filter, the primary filter vacuums large materials. The large H13 filter, with an efficiency of over 99.99% at 0.3 microns, ensures superior air quality when dealing with concrete, fine sanding, or gypsum dust. When the filter gets blocked, an orange warning light comes on and an alarm sounds. A red indicator light signals filter leakage or breakage. Thanks to its compact and lightweight design, the machine is easy to move around, with non - marking, lockable wheels for convenient transportation. Features include a 120V voltage, 0.8HP power, 4.8A current, two - speed cfm (600/1200), dimensions of 27.95'' X 19.68''X 33.64'', a net weight of 84Ibs, and a gross weight of 110Ibs.
Using the B2000 air scrubber is a breeze. First, make sure it's plugged into a 120V power source. You can choose between the two speed settings (600cfm or 1200cfm) based on your air - cleaning needs at the construction site. Place it where it can effectively clean the air, and let it do its job. When the orange warning light comes on and you hear the alarm, it means the filter is blocked. At this point, you should turn off the machine and clean or replace the filter. If the red indicator light is on, there might be a filter leakage or breakage, so stop using the machine immediately and check the filter. For maintenance, regularly check the filters. Clean or replace them as needed to keep the machine running efficiently. Also, inspect the non - marking, lockable wheels to ensure they're in good condition for easy movement. With proper use and maintenance, your B2000 will serve you well for a long time.
