MB-11 Touch Up

Restore the stunning beauty of your calcite - based stones! MB - 11® Touch Up is a remarkable polishing powder crafted for spot - restoring 'water stains' or 'rings' on polished marble, travertine, and other calcite - based stones. Its unique mix of abrasives and catalysts simplifies the polishing process—no power tools required. Ideal for lighter stones, it effortlessly restores surfaces to a brilliant shine. Note: All powders are packed by weight, not volume. Directions: Test on a spare tile first. Wear rubber gloves. Apply 1/8 teaspoon of powder, mist with water to form a paste. Rub with a clean, damp white cotton cloth until dry. For a pro finish, mist again and buff in circular then back - and - forth motions. Repeat if needed. Clean residue with MB - 5 cleaner. Also, check if sealing is needed via the water test and use MB - 24 for extra protection.

Here's how to use MB - 11 Touch Up. First, test it on a spare tile or an out - of - sight area to make sure it works well for your stone. When you handle the product, wear rubber gloves. Take 1/8 teaspoon of the powder and put it on the stained area. Then, use a spray bottle to mist some water on the powder or add a few drops to make a wet paste. Grab a clean, slightly damp white cotton cloth and rub the area until it's dry. If you want a professional - looking finish, mist the area again. Use the same cloth to buff in circular motions with light pressure first, then do a fast back - and - forth motion with more pressure until the stone is dry and shiny. If the stain is still there, you can repeat the process. After that, use MB - 5 Stone & More Multi - Surface Spray Cleaner to get rid of any leftover powder. To check if your stone needs sealing, pour a tablespoon of water on it and wait for 10 - 15 minutes. If the stone looks the same, no need to seal it. But if the area gets darker, it's a good idea to use MB - 24 Barrier for extra protection.