The FOX - O Electric Concrete Vibrator Motor is a great choice for those seeking lightweight and efficient operation. It serves as an internal concrete vibrator. It features a quick - release coupling and carbon brushes that can be easily replaced without opening the housing. The housing, made of polyamide 6 and fiberglass, is not only lightweight but also protected against rain and dust. There's a caged motor inside for extra protection. The TAX - O Shaft for this vibrator has flexible shafts with standard lengths from 7ft to 20ft. Reinforced with metallic mesh and having reinforced ends, it can withstand excessive bending. It also has a quick - release coupling to the motor. The Vibrating Eccentric Head AX comes in 5 different sizes, all working with a single motor. It has an oversized steel eccentric and a treated steel cap. A double - seal design stops oil from entering the shaft and grease from getting into the poker head.
Using the FOX - O Electric Concrete Vibrator Motor is easy. First, connect the TAX - O Shaft to the motor using the quick - release coupling. Then attach the Vibrating Eccentric Head AX that suits your needs. When you turn on the motor, the eccentric head will start vibrating and can be inserted into the concrete for proper consolidation. Remember to always use the correct size of the eccentric head according to your job requirements. When not in use, store the motor in a dry place to avoid damage from moisture. Periodically check the carbon brushes. If they are worn out, replace them quickly as they can be easily removed without opening the housing. For the TAX - O Shaft, make sure to inspect it for any signs of damage, especially at the reinforced ends. Keep the double - seal of the Vibrating Eccentric Head AX clean to ensure it functions well in preventing oil and grease leakage.
